Skip to content
ScreenSplice.

Before you buy

A Pi. An SD card. You’re ready.

Start with the basics. Add a capture card only if you want live video alongside your advertisements.

02 / THE STORAGE

microSD card

32 GB recommended. This holds ScreenSplice and your advertisements.

Recommended on Amazon

Already have an account? Sign in to download ScreenSplice.

Setup details: power, cables & compatibility

Previously observed on Pi 4: Guermok USB ID 345f:2130 and XIIXMASK USB ID 345f:2131. These observations are not certification of every retail unit, replacement chipset, Pi model or OS release. Check the exact USB ID and test picture, sound, reboot and sustained playback before ordering more.

Capture memory requirement

ScreenSplice requires at least 2 GB RAM for a Raspberry Pi capture-card setup. A 1 GB Pi 4 is not supported for capture. Choose 4 GB or more for a new capture-plus-advertisements installation. This is a ScreenSplice support requirement based on onsite experience.

microSD capacity

16 GB installation minimum. Choose 32 GB for menus/images, 64 GB for video-heavy playlists, or 128 GB if your local media library needs it. Leave room for the OS, updates and replacement downloads; aim to keep at least 20% free.

microSD rating & lifespan

Buy a genuine Class 10 / UHS-I card; A1 or A2 recommended, with A2 preferred for Pi 5. U3/V30 is a useful choice for video-heavy use. For continuous operation, consider a high-endurance card from a reputable seller. More storage does not increase playback speed or bypass software media limits.

Card reader & flashing computer

A USB microSD reader compatible with your computer; a full-size SD adapter only if your reader needs one. Flash using Raspberry Pi Imager’s custom-image option. Writing the image erases the selected card. Keep a known-good spare card for recovery.

Pi 5 power

Use the official Raspberry Pi 27 W USB-C supply or an equivalent that provides the required 5 V / 5 A mode. A charger labeled 65 W or ‘fast charging’ may only provide 5 V / 3 A. With a 3 A supply, the Pi 5 normally limits the combined USB peripheral budget to 600 mA; a detected suitable 5 A supply allows up to 1.6 A.

Pi 4 / Pi 3 power

Pi 4: official 15.3 W USB-C supply (5.1 V / 3 A), or suitable equivalent. Pi 3: quality 5.1 V / 2.5 A micro-USB supply. Use the correct connector and a short, suitable cable. Do not rely on a TV’s USB port to power the Pi.

HDMI cables & display

Pi 4/5 need micro-HDMI-to-full-size-HDMI cables; Pi 3 needs a full-size-HDMI cable. These are different from mini-HDMI. Choose an HDMI display that accepts 1920 × 1080. You need one output cable per display and another HDMI cable for each source entering a capture card.

Cooling & mounting

Use a ventilated case appropriate to the board. Active cooling is recommended for Pi 5 and sustained capture workloads. Leave airflow behind the display, secure the player and cables, and keep USB/HDMI connectors accessible.

Network

Ethernet is preferred where available: use a Cat5e or Cat6 cable. Otherwise use a reliable supported Wi-Fi network with its password. Initial pairing, updates, web content and remote commands need internet access. Cached advertisements can play during connection loss. Guest portals and enterprise sign-in are not handled by the simple Wi-Fi setup form.

Capture specification

Require a USB 3.0 host connection, Linux UVC video and USB audio compatibility, and actual 1920 × 1080 capture at 30 fps. ‘4K input’ or ‘4K passthrough’ is not the same as capture resolution. Verify the exact card and cable; connector color alone proves nothing.

Capture power & protected sources

A capture card adds USB load. If plugging it in causes resets, investigate supply, cable and peripheral power; a powered USB 3 hub may be needed. HDMI/HDCP-protected sources may show a black picture and are not guaranteed to work through capture.

Two displays

Separate displays and one-wide-screen span are preview workflows. Budget for two compatible displays and two Pi output cables. Two independent live sources need two capture cards; a single spanned source needs one. Start at 1080p per display and validate bandwidth, cooling and power before rollout. Pi 3 remains single-display only.

Optional recovery equipment

A USB keyboard, spare Ethernet cable and spare flashed microSD card make onsite troubleshooting easier. SSH access uses per-device setup; there is no universal administrator password or shared support key.

How it connects

  • Menus / ads: Pi HDMI output → display HDMI input.
  • Live video: source HDMI output → capture HDMI input → USB 3 port on Pi → Pi HDMI output → display.
  • Phone sharing with receiver: phone → compatible wireless receiver → receiver HDMI output → capture card → Pi USB 3 → Pi HDMI → display.

Other player options

Pi 3 B / B+: Ads-only, one display; prefer still images. 1 GB RAM. No ScreenSplice USB capture.

Pi 3 A+: 512 MB RAM; simple still-image ads only. Not recommended for new purchases or complex animated menus.

Pi 4: 1 GB model: advertisements, menus and slideshows only; not supported for ScreenSplice USB capture. Capture requires at least 2 GB RAM; 4 GB recommended for capture plus advertisements. Test the exact workload.

Pi 5: Ads, menus and capture. 4 GB RAM recommended for new purchases. Use suitable power and active cooling; fresh-image acceptance remains required.

Android / Google TV / RK3518 sticks: Do not flash the Raspberry Pi image onto these. Supplier confirmation of custom Linux, drivers and real USB 3.0 is still pending.

Fire TV stick: Connect through HDMI capture. It does not run the Raspberry Pi image. Dashboard control requires a compatible Fire OS device, debugging approval and network access; Vega is not supported.

Manufacturer references

Raspberry Pi setup, cables and power requirements

Pi 5 USB power budget

Official Raspberry Pi A2 microSD options

Raspberry Pi 4 specifications

Raspberry Pi 3 B+ specifications